Pump Shop Mechanic

Mechanic/Pump/Cylinder - Hydradyne, LLC

Department:
Branch
Job Status:
Full-time

FLSA Status:
Non-Exempt

Reports To:

General Manager/Assistant Manager/Operations Manager

Amount of

Travel Required:

Negligible

Positions Supervised:
None

Assemble, disassemble and repair pumps, motors, cylinders and valves. Diagnose problems and identify parts needed to repair. Test all items, perform work in both shop and field environment.

• Repairs pumps, motors, cylinders and valves.
• Tear down pumps, motors, cylinders and valves for repair. Identify parts needed to repair.
• Build new pumps, motors, cylinders and valves.
• Assist in machine shop as needed.
• Test completed pumps, motors, valves and cylinders according to written procedures.
• Clean, lubricate, and adjust parts, equipment and machinery.
• Record parts and materials needed and request new parts and materials as necessary.
• Maintain a neat and orderly shop.
• Hone/repair barrels.
• Provide assistance in the installation, troubleshooting and maintenance of mechanical, hydraulic and pneumatic systems and controls.
• Maintain test stands and equipment in accordance with ISO procedures.
• Know, understand and abide by environmental policies.
• Weld as needed.

Experience should demonstrate proficiencies in the following areas:

• Hands on mechanical aptitude.
• Ability to pay attention to the minute details of a task.
• Ability to identify and correct conditions that affect employee safety.
• Ability to accept responsibility and account for his/her actions.
• Ability to make decisions while following company procedures.
• Keep management apprised of work and backlog.
• Ability to use cranes, and other heavy and light machines, and equipment.

Education:

High School Graduate or GED/Vocational School

Experience:

Three years mechanic experience, hydraulic experience preferred

Skills taught after hire as needed: ISO Training, Safety Training, Product Training, Maintenance, Quality Training, Forklift Training, Cylinder Repair, Honing, Lathe Operation, Test Stand Operation, Drill Press Operation, Vertical Mill Operation

Certified welder (optional)

Use of forklift and overhead cranes

• Stand:
  Frequently (10 lbs or less).
• Walk:
  Frequently (11‑20 lbs).
• Sit:
  Occasionally (21‑50 lbs).
• Handling/Fingering:
  Frequently (51‑100 lbs).
• Reach Outward:
  Frequently (over 100 lbs).
• Reach Above Shoulder:
  Frequently.
• Push:
  No Failure-To-Care.
• Climb:
  Frequently (12 lbs or less).
• Crawl:
  Frequently (13‑25 lbs).
• Squat or Kneel:
  Frequently (26‑40 lbs).
• Bend:
  Frequently (41‑100 lbs).

None

Works indoors in an uncontrolled temperature environment with occasional work outside.

Applied Industrial Technologies is built on a philosophy that puts people first. We are an equal opportunity employer, and we are committed to a workforce in which we enforce fair treatment and provide growth opportunities for everyone. All qualified applicants will receive consideration for employment regardless of age, race, color, national origin, genetics, religion, gender, marital status, physical or mental disability, or any other characteristic protected by applicable laws, regulations, and ordinances.