Driver, Transportation Logistics, Transportation

Time Type:

Full Time

Commercial Vehicle Operations Driver – Local (Non-CDL) Career Group /Job Family:
Drivers/Operations

Schedule:

Shift 5 Sunday
-Tuesday and every other Wednesay 6am-6pm.

Responsible for pick up and delivery of inbound and outbound to customer location, using company vehicles at least 50% of the time. Employee driver who will operate commercial motor vehicles (vehicles with a Gross Vehicle Weight Range of >10,000 lb ≤26,000 lb) in the area surrounding a DB Schenker facility (within a 150 air-mile radius).

(The following is intended to describe the general nature and level of work being performed. It is not an exhaustive list of all expectations.):

• Verify shipment-bills for required information and load freight onto trucks
• Unload freight from trucks and weigh/check dimensions compared to shipper’s calculations
• Sort outbound freight between overnight and second-day and load ULD and trucks
• Deliver freight to customer location using company vehicles
• Recover freight from customer location using company vehicles

The individual in this position must be capable of performing all of the essential functions with or without a reasonable accommodation.

• Assignment Complexity - Work on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations.
• Accountability – Apply job skills and applicable corporate policies and procedures to complete a wide range of difficult tasks.
• Impact of Decisions – Errors detectable upon supervisory review. Limited impact on corporate operations and fiscal health.
• Working Relationships – Regularly interact with peers and management concerning matters of moderately complex scope and discretion.
• Scope – Work on problems moderately complex in scope. Normally receives no instruction on routine work, general instructions on new assignments.

• Meet all Federal and State standards of qualification for commercial drivers, including but not limited to those as determined and set out by the Department of Transportation and Federal Motor Carrier Safety Regulations.
• Medium work:
  Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.
• 25% of time on the job is spent climbing; ascending or descending stairs, using feet and legs and/or hands and arms. Body ability is emphasized. This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion.
• Up to 25% of time on the job is spent kneeling; bending legs at knee to come to a rest on knee or knees.
• Up to 25% of time on the job is spent crouching; bending the body downward and forward by bending leg and spine.
• 25-75% of time on the job is spent reaching; extending hand(s) and arm(s) in any direction.
• 25-75% of time on the job is spent standing; particularly for sustained periods of time.
• 25-75% of time on the job is spent walking; moving about on foot to accomplish tasks.
• 25-75% of time on the job is spent pushing; using upper extremities to press against something with steady force in order to thrust forward, downward or outward.
• More than 75% time on the job is spent pulling; using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion.
• 25-75% of time on the job is spent lifting; raising objects from a lower to a higher position or moving objects horizontally from position-to-position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles.
• 25-75% of time on the job requires repetitive motions; substantial movements (motions) or the wrists, hands, shoulders and/or fingers.
• 25-75% of time on the job is spent grasping; applying pressure to an object with fingers and palm.
• 25-75% of time on the job is spent talking; expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly.
• 25-75% of time on the job is spent hearing; ability to received detailed information through oral communication, and to make fine discriminations in sound, such as when making fine adjustments on machined parts.

• Must have a valid driver’s license
• Must be able to pass any federal/state/local government, airport, or company-required background checks, clearances, and/or drug and alcohol tests.

This is an intermediate level position. Good interpersonal skills required. High school diploma or equivalent required. Generally, prefer 2-4 years of experience.