NDT Technician 3rd shift

• Employed in current position at least 1 year (12 months).
• Written confirmation of acceptable performance record/evaluation signed by the employee's supervisor and completed no more than 18 months prior to date of transfer application.
• Maintain an acceptable level of performance including but not limited to absence of corrective action and/or resolution of previous corrective action.
• Successfully pass any special screening processes required for the position of interest, including but not limited to background investigations, drug screens, and skills assessments.
• A transferred employee may be subject to additional background screening as required by the position.

The NDT technician performs non-destructive inspection of components to ensure compliance with Company's quality system, specifications, and customer requirements. Non-destructive testing disciplines include penetrant testing and radiography testing.

PRIMARY DUTIES AND RESPONSIBILITIES
:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The duties and responsibilities regularly performed for this position are:

• Must follow production specifications in regard to assembly of new manufactured parts.
• Maintain department safety and housekeeping standards.
• Use of tracking systems
• Maintain and promote "One Chromalloy" Core Values
• Maintain and promote 5S standards in the work area
• Adhere to and promote Company health, safety and environmental policies while performing job duties
• Adhere to and promote Corporate Code of Ethical Standards
• Ensure compliance with Quality Systems Manual and Repair Station Manual.

Level I

• Work safely following all applicable health, safety and environmental rules and policies.
• Demonstrate high ethical standards and integrity as set forth in our Code of Business Conduct and our Principles of Business Conduct, Policies, and Procedures.
• With a positive attitude, demonstrate the ability to effectively participate in a team environment that promotes the company's goals and objectives.
• Ability to apply common sense understanding to carry out instructions delivered in written, oral, or diagram form.
• Ability to read, write, speak, and effectively communicates in English.
• Comply with all applicable regulatory, customer, and internal requirements.
• Be proficient and qualified in proper inspection procedures such as but not limited to incoming, in process (hidden damage) and final.
• Ensure that the equipment used to perform the inspection is in good working condition and that the calibration is current, as applicable.
• Know how to read and use calibrated tooling and equipment such as but not limited to vernier calipers, height gages, pi-tapes, plug gages, dial calipers, dial indicators, protractor, radius gages, hardness tester, dial bore gage, thickness gage, omni gages, go/no go gages, and micrometers.
• Upon receiving items in this repair station for maintenance, verify that the part number and serial number of the items match the customer's paperwork.
• Ensure that all inspections performed are properly documented in either blue or black ink.
• Report to Quality Management any condition noted on an item that requires maintenance to be performed outside the ratings of this repair station.
• Report to Quality Management any quality system deficiencies that may result in the release of unairworthy articles or the use of unapproved material.
• Demonstrate a good mechanical aptitude.
• Continually look for ways to increase efficiency and productivity, while maintaining the required level of quality.
• Display an attitude that promotes teamwork and co-operation between the inspection and productions departments.
• Crosstrain to become proficient inspecting all parts that undergo maintenance at this facility.
• Ensure that proper documentation and certifications are included with components received.
• Ensure that all inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed.
• Ensure the proper handling and preservation of components throughout the inspection process and after maintenance completion.
• Maintain clean, orderly, and safe working conditions.
• Perform other duties as company workload dictates.
• Be able to work any shift as needed due to company needs.
• Provide for continuity of inspection responsibility, assuring completion of required inspection when personnel shift or assignment changes occur.

Level II - All Level I skills plus:

• Understand and implement the policies and procedures set forth in the various CNV Quality Manuals and Procedures.
• Ensure that inspections performed are done so in accordance with approved data such as the Original Engine Manufacture Manuals, the customer's manual or other data approved by the…