Carpenter - UIC Construction; Remote Alaska - Western Village

Position: Carpenter - UIC Construction (Remote Alaska - Western Village Support)
** Overview*
* UIC Construction is seeking a Carpenter to construct, erect, install, or repair structures and fixtures made of wood, such as concrete forms; building frameworks, including partitions, joists, studding, and rafters; and wood stairways, window and door frames, and hardwood floors. May also install cabinets, siding, drywall and batt or roll insulation. Includes brattice builders who build doors or brattices (ventilation walls or partitions) in underground passageways.

** Responsibilities*
* Essential functions will include:

+ Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.

+ Shape or cut materials to specified measurements, using hand tools, machines, or power saws.

+ Follow established safety rules, regulations and maintain a safe and clean environment.

+ Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.

+ Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, usingcarpenters' hand or power tools.

+ Verify trueness of structure, using plumb bob and level.

+ Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings,using woodworking machines, carpenter's hand tools, or power tools.

+ Assemble and fasten materials to make frameworks or props, using hand tools, wood screws,nails, dowel pins, or glue.

+ Remove damaged or defective parts or sections of structures and repair or replace, using handtools.

+ Inspect ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken ordamaged structures.

+ Operate basic construction equipment such as forklifts and man-lifts.

+ Additional duties as assigned.

** Qualifications*
* Minimum Qualifications:

+ At least ten (10) years of verifiable experience in carpentry with a focus on new construction.

+ Must possess and maintain current driver's license.

Knowledge and Critical Skills/Expertise:

+ Knowledge of general, basic construction techniques and safe working practices is essential.

+ Must be able to read and interpret blue prints, drawings and spec books.

+ Must be able to work in a clean and neat manner and with respect to owner's property and operations.

+ Have a basic understanding of interrelated systems such as the electrical, mechanical andplumbing systems.

+ Must be able perform assigned duties in a safe and proficient manner.

+ Must be reliable and able to work with little supervision.

+ Must be able to maintain a clean, neat and safe work site.

+ Willingness to be a team player and to follow instructions.

+ Must have all necessary tools and reliable transportation.

+ Excellent written and oral communications skills.

Physical and Mental Demands:

+ Lift/push/pull 50lbs to 100lbs on an occasional basis.

+ Lift/push/pull up to 20lbs on a frequent basis.

+ Will be required to have the ability to bend, squat, crouch, crawl, and kneel.

+ Will have the ability to climb in a safe manner (climbing includes stairs, scaffolding, ladders, andramps).

+ Perform prolonged standing (2-3 hour intervals).

+ Able to work at a variety of levels (ex. waist, eye, above head).

+ Must have good balance while working on uneven surfaces and maneuvering obstacles.

+ Possess sufficient handgrip and coordination to carry and operate tools and equipment.

+ Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes,goggles, etc., per OSHA standards.

+ Able to respond to verbal and audible sounds/commands.

+ Able to utilize adequate visual skills.

+ Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.

+ Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.

+ Ability to perceive attributes of an object/material such as size, shape, temperature and textureby means of receptors in the hands and fingers.

+ Ability to turn head from side to side and about the vertical axis.

+ Ability to turn body at the waist from side to side and about the vertical axis.

+ Performing physical activities that require considerable use of your arms and legs and movingyour whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.

+ Using hands and arms in handling, installing, positioning, moving materials, and manipulating materials.

Working Conditions:

+ Ability to withstand extreme temperatures (cold and hot).

+ While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions.

+ The employee is frequently exposed to high, precarious places; fumes or airborne particles; and extreme heat.

+ The employee is occasionally exposed to toxic or caustic chemicals and risk of carpenter shock.

+ The noise level in the work environment is usually very loud.

+ The wearing of appropriate personal protective equipment mitigates risks associated with these conditions and is mandatory.

+…