Electrical Bias Multi Skilled Engineer - Llangadog Engineering · UK - Llangadog

General Spec

• Both mechanical and electrical experience
• Strong Industrial experience (minimum of 2 years, as long as they have other engineering experience as well)
• Quals – minimum of BTEC Level 3 or lower plus extensive industry experience.
• Food production is advantageous, but acknowledge that the pool is not large in the area, so as long as they have the basics the rest can (potentially) be taught
• Have to be ok doing shift work

• Must be self-sufficient
• Team focussed
• Can do attitude
• Solutions focussed, willing to step forward and make suggestions for improvements
• Will put themselves out, i.e. do what needs to be done without complaint
• Wants to develop themselves and gain further experience, specialist skills and qualifications e.g. become a Lean Champion

• Sensors (fixing)
• Motor swaps
• PLC experience (programming not required) PLC interrogation & modification required
• Fault investigation (up to PLC level)
• Inverter drives
• 3phase – installation & maintenance
• Fault finding

• Bearings and pneumatics
• Conveyors (fixes and mends)
• Fabrication e.g. making brackets/ repairs
• Will be working on machinery such as:
• Robots
• Conveyors
• Mincers & Grinders
• (Not much with hydraulics)

• Servo drives and motors
• Reading and interpreting electrical drawings
• Electrical/mechanical isolation procedures
• Team working
• Multi skilled
• Process environment trained / work history

• Minimum NVQ level 3 electrical engineering
• 17/18th edition wiring regulations