Machine Repair; Maint - Rad, 2nd shift

Overview

Job title:

Journeyperson Machine Repair, DMMI Maintenance - Radiator, Dept. 248

Core

Hours:

3:00 PM - 11:30 PM

A resume is required in order to be considered for this position.

• High School diploma or G.E.D. equivalent required.
• Must be a Machine Repair or Electrician Journeyperson (as recognized by the Department of Labor) or have 5 years equivalent machine repair or electrician experience working with a recognized Machine Repair or Electrician Journeyperson.
• A resume is required in order to be considered for this position.

The requirements listed below are the minimum qualifications to post to the position. They are not intended to define the limits of the position once granted.

The associate should be able to PM, repair, replace or rebuild the items as listed in the requirements column below.

Notes:
Associates must meet most job requirements at time of bid year (possess approximately 75% of requirements as outlined in the job posting) and demonstrate ability to meet full scope of job requirements within one year.

• Safety Familiarization — Review of safety hazards unique to the position
• Bearings — Know types of bearings, proper use / installation; precision bearings: understand Pre-Load, Alignment, Run-out, Endplay
• Fabricating — Basic welding; basic Machinist skills; basic fabrication; hand sketch drawing & layout; read and understand technical drawings and diagrams
• Precision Measurement — Use of precision measurement tools:
  Calipers, Micrometers, Height gauges; understand concepts of machine alignment verification (static alignment)
• Power Transmission — Understand troubleshooting, repair and replacement of gearboxes, conveyors, clutches, motors, brakes, couplings, chains; know how to splice and tension / track belt conveyors and systems; proper alignment procedure for chain / sprocket / shafts / couplings
• Rigging — Understand DMMI lifting procedures, determine load capacity;
  Chains, Slings, Wire, Boom; forklift PIV license; overhead crane operation
• Core Assembly — Concept of core assembly machines; identification of key components / stations of machines; understanding of machine alignment fundamentals
• Pneumatics — Understand basic pneumatics systems and troubleshoot
• Presses — Operate / home - Understand hydraulic system and pascal clamps
• Furnace — Basic understanding of furnace / oven operation; cooling water circuits; gas burner and gas apparatus operation; agitator, blower, system fan service and rebuild

• More than 2 years in current position unless promo table
• Note:
  
  Length of service for journey persons who have completed DMMI apprenticeship will be based on date of entry into the program
• Last Performance Appraisal Meets or Better
• No Active Written Discipline
• Must be able to perform the essential functions of the position