Electricians Industrial & Panel Wirers

Overview

Electricians - Industrial & Electrical Panel Wiring & Electrical Testing Techs

Working in factories mainly on industrial type work, on the installation of electrical cable tray, ladder racking and electrical cables.

Connecting electrical cables to panels & wiring electrical control panel and other electrical systems from electrical engineering drawings. Checking work & testing work.

Working from IPAF or MEWP Scissor Lift/Cherry Picker

• Connect electrical cables to panels & wire electrical control panels and other electrical systems from electrical engineering drawings.
• Check work & test work.
• Work from IPAF or MEWP Scissor Lift/Cherry Picker.

• Certs & Cards Required = C&G or NVQ 3 17th Ed ideally 18th Ed & 2391 Electrical Engineering - Must have current CSCS or ECS Card, IPAF or MEWP Card, Harness Training & Working at Heights Certs

Hours of Work = Normally working 0700 to 1730 Mon to Fri & Sat if required.

Term of Work = 2 to 4 + weeks plus other phase of work on this site and on other local Sites & Sites such as Barnsley Site or Macclesfield Site with work running from 2 to 12 + weeks subject to attendance, performance and work load. Aim of Company if they can is to keep the same reliable workers on ongoing work on sites in local areas and sites in areas within 20 to 50 minutes travel time.

Fulcrum Engineering are acting as an Employment Business on behalf of our Client.